turning fork level transmitter level switch
turning fork level transmitter level switch

Product Title

Product Title
The operation is not affected by flow, foam, turbulence, floating foam, vibration, solid content, hanging material, liquid characteristics and medium changes.
Digital tube display fork frequency value, instrument self-check information, easy to test
function, timely detection of circuit damage, fork wear, material adhesion and other failures Easy to set: the most commonly used two parameters sensitivity, alarm delay can be set by a single key quickly
Long and short two kinds of tuning fork shape, wide application.
No moving parts or gaps, almost no need for routine maintenance. no need for site calibration, easy installation.
The short fork body' s " fast drop" tuning fork shape design, makes the system response faster,
suitable for viscous liquid. Multiple output modes:
Relay output
PNP output
Frequency output
Equipped with flameproof shells
Supply voltage:
30 VDC
110~220 VAC( relay output only)
Output
Relay DPDT 8A 250VAC PNP output :50 mA ,24V
Frequency output: equal to fork vibration frequency (24 V) Temperature :-30 ~ 70C
Medium operating temperature:
Short fork :-30~ 150C Long fork :-30~250C
Density range:
Liquid ≥600 kg/m3
Solid powder density: ≥100 kg/m3 Liquid viscosity :0.2~ 10,000 cp
Switch delay :0~255 seconds adjustable
Alarm mode ( user set):
wET wet alarm (fork contact material alarm) dry Dry Alarm (Fork Out of MaterialAlarm)
Lag (water): ± 1 mm
Switch point (water) :
short fork: distance from the end of the tuning fork (vertical):13 mm Long fork: a dot on the side of the fork
Maximum operating pressure : ≤ 1 Mpa
Connection mode:
Thread :3/4 " NPT Threads: G1/2
Flange (user specified)
Sanitary Connectors: Fittings :2 "(51 mm) Tri-Clamp Connector , 1 " BSPP (G) O- ring Seal Material:
Shell Material: Die- cast Aluminum Alloy Fork material:
316 stainless steel
316 stainless steel, Teflon surface
Shell Protection Level: IP65
Explosion-proof class: EX d II CT6 .
Fork vibration frequency:
Short fork :1400±50 HZ Long fork :330±50 HZ
Environmental Vibration Level: Acceleration not greater than 1 g
Length of fork extension
Short fork
Standard Long Fork Long-length fork
mm 50
mm 128
1600 mm