4-20mA liquid level transmitter UTZ model with SIL

04-03-2025

displacer level transmitter

UTZ model displacer level transmitter

UTZ series displacer level transmitter

Overview

UTZ series intelligent torsion tube buoy liquid level transmitter is our company's own research and development of field data processing liquid level control instrument. Buoyancy drives the torsion tube and the core shaft to produce the angle change, at the same time also changes the sensor signal in the transmitter, this signal passes through the advanced signal processor, outputs the standard current signal 4-20 mADC, uses the backlight liquid crystal display, he processor has the functions of linearization, measurement error, automatic temperature compensation, HART communication and so on. The displacer level transmitter can be used to control and measure the liquid level, boundary or density of the medium. This series of products is widely used in petroleum, chemical, electric power, metallurgy, food, paper, environmental protection and other industries.

Characteristics

• Torque tube

• Smart Output 4-20 mA Overlay HART Protocol

• High sensitivity

• Anti-j amming

• LCD backlight display

• Field keys and hand manipulators can be debugged,

easy to debug

• The comprehensive technical index is superior to the foreign similar products

• The measuring room can add the visual function in the field, and the liquid level in the buoy can be observed directly through the visual part of the measuring room, which is convenient for the user to install, debug and use. This product is the company patent product, patent number :200520091104

Visual displacer Appearance

Technical parameters

Level of accuracy :0.5%

Range :300〜3000 mm( or special manufacture)

Medium density :0.4〜1.5 g/cm³(liquid level) density difference >0.05 g/cm³(Boundary)

Nominal pressure :1.6~42 MPa

Medium temperature :-100〜400°C

Temperature :-40~70C

Output signal :4-20 mA overlay HART protocol

Electrical interface: M20x1.5(or NPT 1/2”)

Process connection: implement manufacturer's standards DN40、DN50 special requirements

Heat tracing interface: Gl/2”