High Pressure Guilded Wave Radar Level Transmitter
Features of guilded wave radar level transmitter : stainless steel 316L/ceramic antenna can withstand higher temperature and pressure. Application: liquid measurement, high temperature and high pressure conditions, complex process conditions.
High Pressure Guilded Wave Radar Level Transmitter
Features of guilded wave radar level transmitter: stainless steel 316L/ceramic antenna can withstand higher temperature and pressure.
Application: liquid measurement, high temperature and high pressure conditions, complex process conditions.
Maximum range: cable: 30m/rod: 6m
Measurement accuracy: ± 10mm
Process connection: G1½ A/G2A/1½ NPT
Detection component material: stainless steel 316L/ceramic
Wire rope diameter: Φ 4mm、 Φ 6mm/ Φ 10mm
Process temperature: - 200... 400 ° C
Process pressure: vacuum... 400bar
Signal output: two-wire system 4... 20mA/HART
Mounting Requirement
Basic Requirement
Keep in mind that the rope/rod is kept away from obstructions within vessel.The obstructions are like:ladders,
limit switches,heating spirals,struts and etc.Furthermore,rope or rods must not intersect the filling streams.
Be cautious during the installation: the level of the measured medium must not be in the blanking zone,
the mounting location must keep a min distance to the vessel wall,the rope or rod is
perpendicular to the surface of the measured medium. Local or federal safety instruction must
be abided when installation is in explosion hazardous area. Aluminium housing is used for intrinsically safe version,
which can be used in explosion hazardous areas. The instrument must be connected to ground potential in this situation.
